Product category
Ventilated mixing cabinets, gun cleaners and safe storage — manufactured in-house by Greenline.
A mixing room is the heart of the refinishing operation and determines the end result. This is where you mix paint, store solvents and clean equipment afterwards. For the sake of your health it is essential that the equipment extracts the air quickly, and that you can maintain an efficient workflow. Greenline's ventilated units are developed for a safe working environment and an efficient workflow.
The range below covers complete mixing rooms: mixing benches, cleaning and mixing cabinets, ventilated hazardous-material storage and gun cleaners — all manufactured in-house in Frillesås, Sweden.
Installed at customer sites
ROI calculator
Work out what an enclosed cleaning cabinet can save your workshop each year — in labour hours, solvent and disposal cost. Adjust the sliders and the figures update instantly.
Every value is yours to change.
Based on 220 working days per year.
In depth
The mixing room is where the finish is effectively decided. This is where the colour is mixed, where the solvents are stored, where the spray guns are cleaned. If something goes wrong here it shows directly in the end result — but it is usually only discovered once the job is finished, which leads to unnecessary and costly rework.
The mixing room is also the place in the workshop where staff are most exposed to solvents and isocyanates. Ventilated units are therefore not a matter of comfort but of occupational health — and, ultimately, of being able to keep experienced painters.
Mixing takes place at a ventilated bench. Mix comes in three sizes with a supply-air box at the front that delivers fresh air straight to the painter's workstation. Where windows or doors limit the ceiling height, there is Midimix 195, with a low, open design. Kombi adds a wash sink and viscosity check in the same unit.
Cleaning is handled by Clean 100, Systemtvätt 195 or Kombi — depending on how many people need to wash and which materials you work with. Systemtvätt 195 holds three washes and handles both solventborne and waterborne paint. Clean 100 and Kombi are used for either solventborne or waterborne — never both in the same cabinet. Why that is, we explain in Never wash water and solvent in the same washer.
Storage is solved with Store in three widths for a broad range, and Tiro where you are short of space or want to prioritise overview — 200 litres in a 450 mm width, with five shelves that pull out at once. Miljö provides a ventilated space for a solvent recycler or other equipment that requires exhaust air. All cabinets are approved for isocyanate-containing materials, provided they are connected to exhaust air according to the instructions.
If you want the full picture of how a mixing room is put together — equipment, ventilation and regulations step by step — read the guide Mixing room for the refinishing workshop.
The entire Green Line range is developed by us and manufactured locally in Frillesås. That means we can adapt solutions to your premises rather than the other way around, that the quality is second to none, and that spare parts remain available long after a model has been discontinued.
Ventilation requirements vary widely between products — from 100 m³/h for a Tiro to 4,100 m³/h for a Systemtvätt 195. Get in touch before you decide, and we'll work out what your existing ventilation can actually handle.
